【DO!BOOK・ページリンク】
6-p1125-1147-izn10_en   24 / 29

BOOKをみる

10秒後にBOOKのページに移動します


1. Periodically (for example, every two weeks) inspect the ionizer and clean the electrode needles. Conduct a regular maintenance to see if the product is run having a disorder. Maintenance should be conducted by a fully knowledgeable and experienced person about the equipment. Using for long periods of time will lower the static neutralization performance, if particles attach to the electrode pin. When the maintenance signal LED lights up, clean the electrode needle. Replace the electrode cartridge, if the pins are worn and the static neutralization performance does not return even after being cleaned. Maintenance Warning This product contains a high voltage generation circuit. When performing maintenance inspection, be sure to confirm that the power supply to the ionizer is turned off. Never disassemble or modify the ionizer, as this may not only impair the product’s functionality but could cause an electric shock or electric leakage. Danger High Voltage! 2. The tube and fitting must be treated as consumable parts. The tube and fitting that are connected to the female piping ports of the ionizer can deteriorate due to ozone and need to be replaced regularly or use an ozone-resistant type. 3. When cleaning the electrode pin or replacing the electrode cartridge, be sure to turn off the power supply to the main body. Touching an electrode needle when it is electrified may result in electric shock or other accidents. 4. Do not disassemble or modify this product. Otherwise, an electrical shock, damage and/or a fire may occur. Also, the disassembled or modified products may not achieve the performances guaranteed in the specifications, and excercise caution because the product will not be warrantied. 5. Do not operate this product with wet hands. Otherwise, an electrical shock or accident may occur. 1. Do not drop, bump or apply excessive impact (10 G or more) while handling. Even though it does not appear to be damaged, the internal parts may be damaged and cause a malfunction. 2. When mounting/dismounting the cable, use your finger to pinch the claw of the modular plug, then attach/detach it correctly. Otherwise, modular plug mounting section may be damaged and cause a disorder. Handling Warning Specific Product Precautions 3 Be sure to read this before handling. Refer to front matter 56 for Safety Instructions. Series IZN10 1147 IZS IZF IZD IZE IZH IZN a