(mm) Note 1) Confirm that it is possible to secure the minimum bending radius of 10 mm of the auto switch lead wire before use. Note 2) Confirm that it is possible to securely set the auto switch(es) within the range of indicator green light ON range before use. For in-line entry type, also consider Note 1) shown above. Note 3) The minimum bending radius of the D-P4DWm is 25 mm. Minimum Stroke for Auto Switch Mounting (mm) . Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately ±30% dispersion) and may change substantially depending on the ambient environment. Operating Range Auto Switch Mounting Brackets/Part No. Auto switch model Number of auto switches o32 o40 o50 o63 o80 o100 D-M9mV With 1 pc. 5 With 2 pcs. 5 D-M9m With 1 pc. 5 With 2 pcs. 10 D-M9mW With 1 pc. 5 Note 2) With 2 pcs. 10 D-M9mWV With 1 pc. 5 Note 2) With 2 pcs. 10 D-A9m With 1 pc. 5 With 2 pcs. 10 D-A9mV With 1 pc. 5 With 2 pcs. 10 D-P3DWA With 1 pc. 15 With 2 pcs. 15 D-P4DWm With 1 pc. 5 Note 2) 3) With 2 pcs., Different surfaces 10 Note 2) 3) With 2 pcs., Same surface 75 10 Auto switch model Bore size 32 40 50 63 80 100 D-M9m/M9mV D-M9mW/M9mWV 6 6 6 6.5 6 7 D-A9m/A9mV 9.5 9.5 9.5 11 10.5 10.5 D-P3DWA 6 6 6 6 6 7 D-P4DWm 5 5 5 5.5 6 6.5 Auto switch model Bore size o32 to o100 D-P4DWm BMG7-032 Auto Switch Mounting MGPM -XC88/XC91 -XC88W/XC89W/XC91W 60-4 Clamp Cylinders Spatter Resistant Cylinders for Arc Welding Flow Control Equipment Fittings Tubing Detection Switches Gas/Air Switching Valve A