15 . Prevent the work from contacting the rubber material, and stop transition of the oil oozing out of the rubber material. (Note: Please consult SMC for details.) . With combination with bellows pad, scratches on the work can be decreased. . Applications: Suction process of semiconductor and FPD devices Attachment Standard pad diameter o6 o8 o10 o13 o16 o20 o25 o32 Conductive PEEK ZP-E201-DBH00142 ZP-E202-DBH00142 ZP-E203-DBH00142 ZP-E204-DBH00142 ZP-E205-DBH00142 ZP-E206-DBH00142 ZP-E207-DBH00142 ZP-E208-DBH00142 Variations Size Material Applicable pad o6, o8, o10, o13, o16, o20, o25, o32 Conductive PEEK (Volume resistivity: 105 to 106 Ω・cm) Bellows vacuum pad How to Order (attachment and pad together) . As shown below, add . for the attachment part number beneath the vacuum pad number. But please note that they are not assembled. . This attachment can be mounted to SMC standard bellows pad only. . For conductive PEEK attachment, use the pad made of conductive material. Ex. ZPT06B9NJ10-B5-A8 . ZP-E201-DBH00142 Attachment part number Vacuum pad part number Note) Part number in above table shows the number for the attachment only. If pad is ordered together, please refer followings. With the use of conductive PEEK material attachment on the bellows rubber pad, static electricity can be prevented, and oil will not be left on the work. Clean Attachment for Vacuum Pad / ZP-E20-DBH00142 Attachment Conductive bellows pad Made to Order Antistatic Equipment Vacuum Pad Made to Order