Reduced Pressure Loss S Couplers Energy-saving Circuit Conventional Circuit Operating pressure at the outlet: 0.5 MPa Compressor efficiency: 0.7 Annual operating time: 2500 hours Flow rate: 1.2 m3/min (ANR) Operating pressure at the outlet: 0.5 MPa Compressor efficiency: 0.7 Annual operating time: 2500 hours Flow rate: 1.2 m3/min (ANR) Since pressure loss is smaller than the conventional model (Series KK13), even if inlet pressure is reduced, equivalent outlet pressure and flow rate can be achieved when it is used for air blow. Enables lower compressor discharge pressure. It is possible to reduce the cost with lower air and energy consumption of compressors. Inlet pressure 0.54 MPa Energy-saving model Conventional model 7% Corresponding value: Electricity unit \15/kWh  Refer to the energy saving program and catalog for details. (\11,000/year reduction) Power consumption by compressor \262,000/year Inlet pressure 0.58 MPa Power consumption by compressor \273,000/year Lower Pressure in the Piping Line Series KK130 MPa Inlet pressure Outlet pressure 0.5 MPa Constantly used between 0 and 2 m3/min (ANR) Compressor S coupler 10