Resin Attachment Cyclone Pad Mark-free Pad Series Minimizes the transfer of rubber constituents to the workpiece. Mark-free NBR Pad Stuck Fluororesin Pad 1 3 2 4 5 μm 5 μm 5 μm 5 μm Made to Order The above adsorption marks show sample data. Actual results will depend on the conditions. 5 μm Related Pad Pad Si board Adsorption mark Analysis equipment: Scanning probe microscope Measurement conditions: Measurement mode Atomic force microscope DFM mode Sample conditions: Press the vacuum pad to the Si board for 1 hour. Monitoring location: Monitored at a randomly selected location where adsorption marks were likely due to contact between the vacuum pad and Si board. Standard silicone rubber Enlarged view PEEK material is used for the pad adsorption surface. Prevents the transfer of rubber constituents. Pad diameter: o6 to o32 No adsorption mark is left because the vacuum pad does not come into contact with the workpiece. Minimizes the transfer of rubber constituents which is supposed to be the cause of adsorption. Pad diameter: o4 to o125 Fluororesin sheet is baked onto the pad adsorption surface. Prevents the transfer of rubber constituents. Pad diameter: o40 to o125 Attachment Heavy-duty type P.1359 1200