100 mm/s Return speed Design/Selection Note) Use Series AS-FM with -X214 for the throttle valve. (Reference) Recommended circuit for high return speed When low extension speed and high return speed are desired, the following circuit using 3-port is recommended. Speed Controller Cylinder Solenoid valve Tubing Silencer Max. return speed (mm/s) 10 20 30 ASD230FM CJ2 SYJ500 TU0604 1 m AN110- 01 ASD330FM CM2 SYJ700 TU0604 1 m AN110- 01 Cylinder size o16 o10 o6 o20 o25 o32 Cylinder size Series ASD-FM Specific Product Precautions Be sure to read before handling. Refer to front matter 56 for Safety Instructions and pages 468 to 471 for Flow Control Equipment Precautions. Caution 1. Single acting cylinder When controlling a single acting cylinder, the cylinder’s return speed will differ depending on the operating conditions. Operate after confirming the maximum return speeds shown in the table below. . Cylinder extension speed: 100 mm/s . Meter-out needle fully open . Values are measured at 0.5 MPa and 20°C. 580